Base-Free Catalytic Hydrogen Production from Formic Acid Mediated by a Cubane-Type Mo3S4 Cluster Hydride.

Formic acid (FA) dehydrogenation is an attractive process in the implementation of a hydrogen economy. To make this process greener and less costly, the interest nowadays is moving toward non-noble metal catalysts and additive-free protocols. Efficient protocols using earth abundant first row transition metals, mostly iron, have been developed, but other metals, such as molybdenum, remain practically unexplored. Herein, we present the transformation of FA to form H2 and CO2 through a cluster catalysis mechanism mediated by a cuboidal [Mo3S4H3(dmpe)3]+ hydride cluster in the absence of base or any other additive. Our catalyst has proved to be more active and selective than the other molybdenum compounds reported to date for this purpose. Kinetic studies, reaction monitoring, and isolation of the [Mo3S4(OCHO)3(dmpe)3]+ formate reaction intermediate, in combination with DFT calculations, have allowed us to formulate an unambiguous mechanism of FA dehydrogenation. Kinetic studies indicate that the reaction at temperatures up to 60 °C ends at the triformate complex and occurs in a single kinetic step, which can be interpreted in terms of statistical kinetics at the three metal centers. The process starts with the formation of a dihydrogen-bonded species with Mo-H···HOOCH bonds, detected by NMR techniques, followed by hydrogen release and formate coordination. Whereas this process is favored at temperatures up to 60 °C, the subsequent ß-hydride elimination that allows for the CO2 release and closes the catalytic cycle is only completed at higher temperatures. The cycle also operates starting from the [Mo3S4(OCHO)3(dmpe)3]+ formate intermediate, again with preservation of the cluster integrity, which adds our proposal to the list of the infrequent cluster catalysis reaction mechanisms.

Disclosing the Biocide Activity of α-Ag2-2xCuxWO4 (0 ≤ x ≤ 0.16) Solid Solutions.

In this work, α-Ag2-2xCuxWO4 (0 ≤ x ≤ 0.16) solid solutions with enhanced antibacterial (against methicillin-resistant Staphylococcus aureus) and antifungal (against Candida albicans) activities are reported. A plethora of techniques (X-ray diffraction with Rietveld refinements, inductively coupled plasma atomic emission spectrometry, micro-Raman spectroscopy, attenuated total reflectance-Fourier transform infrared spectroscopy, field emission scanning electron microscopy, ultraviolet-visible spectroscopy, photoluminescence emissions, and X-ray photoelectron spectroscopy) were employed to characterize the as-synthetized samples and determine the local coordination geometry of Cu2+ cations at the orthorhombic lattice. To find a correlation between morphology and biocide activity, the experimental results were sustained by first-principles calculations at the density functional theory level to decipher the cluster coordinations and electronic properties of the exposed surfaces. Based on the analysis of the under-coordinated Ag and Cu clusters at the (010) and (101) exposed surfaces, we propose a mechanism to explain the biocide activity of these solid solutions.

Molecularly Engineering Defective Basal Planes in Molybdenum Sulfide for the Direct Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes.

Developing more sustainable catalytic processes for preparing N-heterocyclic compounds in a less costly, compact, and greener manner from cheap and readily available reagents is highly desirable in modern synthetic chemistry. Herein, we report a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes in the presence of molecular hydrogen. An innovative molecular cluster-based synthetic strategy that employs Mo3S4 complexes as precursors have been used to engineer a sulfur-deficient molybdenum disulfide (MoS2)-type material displaying structural defects on both the naturally occurring edge positions and along the typically inactive basal planes. By applying this catalyst, a broad range of functionalized 2-substituted benzimidazoles, including bioactive compounds, can be selectively synthesized by such a direct hydrogenative coupling protocol even in the presence of hydrogenation-sensitive functional groups, such as double and triple carbon-carbon bonds, nitrile and ester groups, and halogens as well as diverse types of heteroarenes.

Tuning the Catalytic Performance of Cobalt Nanoparticles by Tungsten Doping for Efficient and Selective Hydrogenation of Quinolines under Mild Conditions.

Non-noble bimetallic CoW nanoparticles (NPs) partially embedded in a carbon matrix (CoW@C) have been prepared by a facile hydrothermal carbon-coating methodology followed by pyrolysis under an inert atmosphere. The bimetallic NPs, constituted by a multishell core-shell structure with a metallic Co core, a W-enriched shell involving Co7W6 alloyed structures, and small WO3 patches partially covering the surface of these NPs, have been established as excellent catalysts for the selective hydrogenation of quinolines to their corresponding 1,2,3,4-tetrahydroquinolines under mild conditions of pressure and temperature. It has been found that this bimetallic catalyst displays superior catalytic performance toward the formation of the target products than the monometallic Co@C, which can be attributed to the presence of the CoW alloyed structures.

On the catalytic transfer hydrogenation of nitroarenes by a cubane-type Mo3S4 cluster hydride: disentangling the nature of the reaction mechanism.

Cubane-type Mo3S4 cluster hydrides decorated with phosphine ligands are active catalysts for the transfer hydrogenation of nitroarenes to aniline derivatives in the presence of formic acid (HCOOH) and triethylamine (Et3N). The process is highly selective and most of the cluster species involved in the catalytic cycle have been identified through reaction monitoring. Formation of a dihydrogen cluster intermediate has also been postulated based on previous kinetic and theoretical studies. However, the different steps involved in the transfer hydrogenation from the cluster to the nitroarene to finally produce aniline remain unclear. Herein, we report an in-depth computational investigation into this mechanism. Et3N reduces the activation barrier associated with the formation of Mo-HHOOCH dihydrogen species. The global catalytic process is highly exergonic and occurs in three consecutive steps with nitrosobenzene and N-phenylhydroxylamine as reaction intermediates. Our computational findings explain how hydrogen is transferred from these Mo-HHOOCH dihydrogen adducts to nitrobenzene with the concomitant formation of nitrosobenzene and the formate substituted cluster. Then, a ß-hydride elimination reaction accompanied by CO2 release regenerates the cluster hydride. Two additional steps are needed for hydrogen transfer from the dihydrogen cluster to nitrosobenzene and N-phenylhydroxylamine to finally produce aniline. Our results show that the three metal centres in the Mo3S4 unit act independently, so the cluster can exist in up to ten different forms that are capable of opening a wide range of reaction paths. This behaviour reveals the outstanding catalytic possibilities of this kind of cluster complexes, which work as highly efficient catalytic machines.

Nanolayered cobalt-molybdenum sulphides (Co-Mo-S) catalyse borrowing hydrogen C-S bond formation reactions of thiols or H2S with alcohols.

Nanolayered cobalt-molybdenum sulphide (Co-Mo-S) materials have been established as excellent catalysts for C-S bond construction. These catalysts allow for the preparation of a broad range of thioethers in good to excellent yields from structurally diverse thiols and readily available primary as well as secondary alcohols. Chemoselectivity in the presence of sensitive groups such as double bonds, nitriles, carboxylic esters and halogens has been demonstrated. It is also shown that the reaction takes place through a hydrogen-autotransfer (borrowing hydrogen) mechanism that involves Co-Mo-S-mediated dehydrogenation and hydrogenation reactions. A novel catalytic protocol based on the thioetherification of alcohols with hydrogen sulphide (H2S) to furnish symmetrical thioethers has also been developed using these earth-abundant metal-based sulphide catalysts.

Efficient and Selective N-Methylation of Nitroarenes under Mild Reaction Conditions.

Herein, we report a straightforward protocol for the preparation of N,N-dimethylated amines from readily available nitro starting materials using formic acid as a renewable C1 source and silanes as reducing agents. This tandem process is efficiently accomplished in the presence of a cubane-type Mo3 PtS4 catalyst. For the preparation of the novel [Mo3 Pt(PPh3 )S4 Cl3 (dmen)3 ]+ (3+ ) (dmen: N,N'-dimethylethylenediamine) compound we have followed a [3+1] building block strategy starting from the trinuclear [Mo3 S4 Cl3 (dmen)3 ]+ (1+ ) and Pt(PPh3 )4 (2) complexes. The heterobimetallic 3+ cation preserves the main structural features of its 1+ cluster precursor. Interestingly, this catalytic protocol operates at room temperature with high chemoselectivity when the 3+ catalyst co-exists with its trinuclear 1+ precursor. N-heterocyclic arenes, double bonds, ketones, cyanides and ester functional groups are well retained after N-methylation of the corresponding functionalized nitroarenes. In addition, benzylic-type as well as aliphatic nitro compounds can also be methylated following this protocol.

Selective Ruthenium-Catalyzed Reductive Alkoxylation and Amination of Cyclic Imides.

Reported herein, for the first time, is the selective ruthenium-catalyzed reductive alkoxylation and amination of phthalimides/succinimides. Notably, this novel methodology avoids hydrogenation of the aromatic ring and allows methoxylation of substituted imides with good to excellent selectivity for one of the carbonyl groups. The reported method opens the door to the development of new processes for the selective synthesis of various functionalized N-heterocyclic compounds. As an example, intramolecular reductive couplings to afford tricyclic compounds are presented for the first time.

Catalytic N-Alkylation of Amines Using Carboxylic Acids and Molecular Hydrogen.

A convenient, practical and green N-alkylation of amines has been accomplished by applying readily available carboxylic acids in the presence of molecular hydrogen. Applying an in situ formed ruthenium/triphos complex and an organic acid as cocatalyst, a broad range of alkylated secondary and tertiary amines are obtained in good to excellent yields. This novel method is also successfully applied for the synthesis of unsymmetrically substituted N-methyl/alkyl anilines through a direct three-component coupling reaction of the corresponding amines, carboxylic acids, and CO2 as a C1 source.

Convenient Reductive Methylation of Amines with Carbonates at Room Temperature.

Methylation of amines is a fundamental and commonly used reaction in organic synthesis. Many methods are known including various reductive methylations using formaldehyde, formic acid, or carbon dioxide in the presence of reductants. However, several of these methods suffer from limited substrate scope and chemoselectivity because of the different nucleophilicities of substrates. In this respect, the combination of carbonates and hydrosilanes is a valuable methylation source in the presence of Pt-based catalysts. This highly tunable method allows for methylation of both aromatic and aliphatic amines, and chemoselective methylation of aminoalcohols and diamines. Notably, the in situ-formed catalyst can also be used for the reduction of carbonates to methanol at room temperature. Mechanistic insights on intermediates formed during the reaction pathway were obtained by using ESI mass spectrometry.

Direct catalytic N-alkylation of amines with carboxylic acids.

A straightforward process for the N-alkylation of amines has been developed applying readily available carboxylic acids and silanes as the hydride source. Complementary to known reductive aminations, effective C-N bond construction proceeds under mild conditions and allows obtaining a broad range of alkylated secondary and tertiary amines, including fluoroalkyl-substituted anilines as well as the bioactive compound Cinacalcet HCl.

General catalytic methylation of amines with formic acid under mild reaction conditions.

A general catalytic protocol for the methylation of amines has been developed applying, for the first time, formic acid as the C1 building block and silanes as reducing agents. A broad range of aromatic and aliphatic, both primary and secondary, amines has been converted to the corresponding tertiary amines including [N-(13)C]-labelled drugs in good to excellent yields under mild conditions.

Cubane-type Mo3FeS4(4+,5+) complexes containing outer diphosphane ligands: ligand substitution reactions, spectroscopic studies, and electronic structure.

A general protocol to access Mo(3)FeS(4)(4+) clusters selectively modified at the Fe coordination site is presented starting from the all-chlorine Mo(3)(FeCl)S(4)(dmpe)(3)Cl(3) (1) [dmpe = 1,2-bis(dimethylphosphane-ethane)] cluster and tetrabutylammonium salts (n-Bu(4)NX) (X = CN(-), N(3)(-), and PhS(-)). Clusters Mo(3)(FeX)S(4)(dmpe)(3)Cl(3) [X = CN(-) (2), N(3)(-) (3), and PhS(-) (4)] are prepared in high yield, and comparison of geometric and redox features upon modification of the coordination environment at the Fe site at parity of ligands at the Mo sites is also presented. The existence of the cubane-type Mo(3)FeS(4)(4+,5+) redox couple is demonstrated by cyclic voltammetry and for compound 1 by cluster synthesis and X-ray structure determinations. Ground states for the 1/1(+) redox couple are evaluated on the basis of magnetic susceptibility measurements, electron paramagnetic resonance, and (57)Fe Mössbauer spectroscopy aimed at providing an input of experimental data for electronic structure determination based on density functional theory calculations.

Chemoselective transfer hydrogenation to nitroarenes mediated by cubane-type Mo3S4 cluster catalysts.

Chemoselective cubes: Cubane-type [Mo(3)S(4)X(3)(dmpe)(3)](+) clusters (dmpe = 1,2-(bis)dimethylphosphinoethane), in combination with an azeotropic 5:2 mixture of HCOOH and NEt(3) as the reducing agent, act as selective cluster catalysts (X = H) or precatalysts (X = Cl) for the transfer hydrogenation of functionalized nitroarenes, without the formation of hazardous hydroxylamines.

General and selective iron-catalyzed transfer hydrogenation of nitroarenes without base.

The first well-defined iron-based catalyst system for the reduction of nitroarenes to anilines has been developed applying formic acid as reducing agent. A broad range of substrates including other reducible functional groups were converted to the corresponding anilines in good to excellent yields at mild conditions. Notably, the process constitutes a rare example of base-free transfer hydrogenations.

Chiral [Mo3S4H3(diphosphine)3]+ hydrido clusters and study of the effect of the metal atom on the kinetics of the acid-assisted substitution of the coordinated hydride: Mo vs W.

The molybdenum(IV) cluster hydrides of formula [Mo(3)S(4)H(3)(diphosphine)(3)](+) with diphosphine = 1,2-(bis)dimethylphosphinoethane (dmpe) or (+)-1,2-bis-(2R,5R)-2,5-(dimethylphospholan-1-yl)ethane ((R,R)-Me-BPE) have been isolated in moderate to high yields by reacting their halide precursors with borohydride. Complex [Mo(3)S(4)H(3)((R,R)-Me-BPE)(3)](+) as well as its tungsten analogue are obtained in optically pure forms. Reaction of the incomplete cuboidal [M(3)S(4)H(3)((R,R)-Me-BPE)(3)](+) (M = Mo, W) complex with acids in CH(2)Cl(2) solution shows kinetic features similar to those observed for the related incomplete cuboidal [W(3)S(4)H(3)(dmpe)(3)](+) cluster. However, there is a decrease in the value of the rate constants that is explained as a result of the higher steric effect of the diphosphine. The rate constants for the reaction of both clusters [M(3)S(4)H(3)((R,R)-Me-BPE)(3)](+) (M = Mo, W) with HCl have similar values, thus indicating a negligible effect of the metal center on the kinetics of reaction of the hydrides coordinated to any of both transition metals.

Site specific ligand substitution in cubane-type Mo3FeS(4)(4+) clusters: kinetics and mechanism of reaction and isolation of mixed ligand Cl/SPh complexes.

The synthesis, crystal structure and solution characterization of the cubane-type [Mo(3)(FeCl)S(4)(dmpe)(3)Cl(3)] (1) (dmpe = 1,2-bis(dimethylphophane-ethane)) cluster are reported and the ligand substitution processes of chloride by thiophenolate investigated. The kinetics and the intimate mechanism of these substitutions reveal that compound 1 undergoes a number of Fe and Mo site specific ligand substitution reactions in acetonitrile solutions. In particular, PhS(-) coordination at the tetrahedral Fe site proceeds in a single resolved kinetic step whereas such substitutions at the Mo sites proceed more slowly. The effect of the presence of acids in the reaction media is also investigated and reveals that an acid excess hinders substitution reactions both at the Fe and Mo sites; however, an acid-promoted solvolysis of the Fe-Cl bonds is observed. Electrospray ionization (ESI) and tandem (ESI-MS/MS) mass spectrometry allow the identification of all the reaction intermediates proposed on the basis of stopped-flow measurements. The distinctive site specific reactivity made it possible to isolate two new clusters of the Mo(3)FeS(4)(4+) family featuring mixed chlorine/thiophenolate ligands, namely Mo(3)S(4)(FeSPh)(dmpe)(3)Cl(3) (2) and [Mo(3)S(4)(FeSPh)(dmpe)(3)(SPh)(3)] (3). A detailed computational study has also been carried out to understand the details of the mechanism of substitution at the M-Cl (M = Mo and Fe) bonds as well as the solvolysis at the Fe-Cl sites, with particular emphasis on the role of acids on the substitution process. The results of the calculations are in agreement with the experimental observations, thus justifying the non-existence of an accelerating effect of acids on the thiophenolate substitution reaction, which differs from previous proposals for the Fe(4)S(4) and MoFe(3)S(4) clusters and some related compounds.

Hybrid organic/inorganic complexes based on electroactive tetrathiafulvalene-functionalized diphosphanes tethered to C(3)-symmetrized Mo(3)Q(4) (Q = S, Se) clusters.

A two-step procedure for the preparation of hybrid complexes based on electroactive tetrathiafulvalene (TTF)- functionalized o-P(2) diphosphanes (o-P(2) = 3,4-dimethyl-3,4-bis(diphenylphosphino)tetrathiafulvalene) and inorganic C(3)-symmetrized Mo(3)Q(4) (Q = S, Se) clusters, namely, [Mo(3)S(4)Cl(3)(o-P(2))(3)]PF(6) ([1]PF(6)) and [Mo(3)Se(4)Cl(3)(o-P(2))(3)]PF(6) ([2]PF(6)), is reported. Their molecular and electronic structures are also described on the basis of X-ray diffraction experiments and density functional theory (DFT) calculations aimed at understanding the interactions established between both the organic and the inorganic parts. Cyclic voltammograms of compounds [1]PF(6) and [2]PF(6) display reduction features associated to the Mo(3)Q(4) core and oxidation characteristics due to the TTF skeleton. The oxidation chemistry of [1]PF(6) and [2]PF(6) in solution is also investigated by means of in situ electrospray ionization (ESI) mass spectrometry, UV-vis, and, electron paramagnetic resonance (EPR) measurements. Upon addition of increasing amounts of NOPF(6) (less than 3 equiv), the sequential formation of 1(n+) (n = 1-4) species was observed whereas addition of a 3-fold excess of NOPF(6) allows to access the three-electron oxidized [Mo(3)S(4)Cl(3)(o-P(2))(3)](4+) (1(4+)) and [Mo(3)Se(4)Cl(3)(o-P(2))(3)](4+) (2(4+)) cations. These 1(4+) and 2(4+) cations represent still rare examples of complexes with oxidized TTF-ligands that are remarkably stable either toward diphosphane dissociation or phosphane oxidation. Polycrystalline samples of compound [1](PF(6))(4) were obtained by oxidation of compound [1]PF(6) using NOPF(6) which were analyzed by solid state absorption, UV-vis, and Raman spectroscopies.